Fire Prevention and Control in Masonry: Safety Measures and Extinguisher Use

Question 1

Which of the following is NOT a common fire hazard in masonry workplaces?

Accepted Answer

Oxygen tanks

Answer

Flammable liquids

Answer

Electrical equipment

Answer

Welding and cutting operations

Question 2

Which type of fire extinguisher is most suitable for extinguishing electrical fires?

Accepted Answer

Class C

Answer

Class A

Answer

Class B

Answer

Class D

Question 3

What is the first step to take when a fire occurs in a masonry workplace?

Accepted Answer

Call the fire department and evacuate the area

Answer

Attempt to extinguish the fire yourself

Answer

Wait for instructions from a supervisor

Answer

Turn off the power and gas supply if possible

Question 4

True or False: It is acceptable to store flammable liquids in open containers in masonry workplaces.

Accepted Answer

False

Answer

True

Question 5

When using a fire extinguisher, the recommended technique is known as:

Accepted Answer

PASS (Pull, Aim, Squeeze, Sweep)

Answer

PAHS (Pull, Aim, Hold, Sweep)

Answer

PASA (Pull, Aim, Sweep, Aim)

Answer

SAHP (Sweep, Aim, Hold, Pull)

Question 6

Which of the following practices violates fire safety regulations in a masonry workplace?

Accepted Answer

Using extension cords as permanent wiring

Answer

Storing flammable materials in sealed containers

Answer

Leaving electrical cords unplugged when not in use

Answer

Smoking only in designated areas

Question 7

Which of the following is NOT a good housekeeping practice for fire prevention?

Accepted Answer

Allowing smoking in designated areas

Answer

Storing flammable materials in a secure location

Answer

Keeping work areas clean and free of debris

Answer

Inspecting equipment regularly

Question 8

What are the essential elements necessary for a fire to occur?

Accepted Answer

Fuel, oxygen, heat

Answer

Fuel, igniter, oxygen

Answer

Heat, oxygen, smoke

Answer

Smoke, fuel, igniter

Question 9

How do fire drills and evacuation plans help reduce fire hazards in masonry workplaces?

Accepted Answer

They familiarize employees with escape routes and evacuation procedures.

Answer

They train employees on using fire extinguishers.

Answer

They help identify and reduce potential fire hazards.

Question 10

Which action is considered the primary step in preventing fires in masonry workplaces?

Accepted Answer

Eliminating potential ignition sources

Answer

Installing fire extinguishers

Answer

Providing proper ventilation

Answer

Educating employees on fire safety

Question 11

For Class A fires, which type of fire extinguisher is most appropriate?

Accepted Answer

Water extinguisher

Answer

Carbon dioxide extinguisher

Answer

Dry chemical extinguisher

Answer

Foam extinguisher

Question 12

In the event of a minor fire in your workplace, which course of action should you prioritize?

Accepted Answer

Both 1 and 3

Answer

Call the fire department

Answer

Attempt to extinguish it yourself

Answer

Evacuate the workplace

Question 13

In masonry workplaces, what is the minimum required clearance around flammable materials?

Accepted Answer

Dependent on the specific material

Answer

18 inches

Answer

3 feet

Answer

6 feet

Question 14

Which of the following is not a primary responsibility of a Fire Safety Officer?

Accepted Answer

Extinguishing fires

Answer

Conducting fire drills

Answer

Inspecting fire extinguishers

Answer

Developing evacuation plans

Question 15

In masonry workplaces, which of these is **not** considered a typical fire hazard?

Accepted Answer

Damp wood

Answer

Flammable liquids

Answer

Overloaded electrical circuits

Answer

Welding sparks

Question 16

In the event of encountering smoke while evacuating a building during a fire, the recommended action is to:

Accepted Answer

Stay close to the ground and cover your nose and mouth with a wet cloth

Answer

Hold your breath until you reach safety

Answer

Evacuate as quickly as possible without regard to smoke conditions

Answer

Attempt to extinguish the smoke before proceeding to evacuate

Question 17

If you identify an electrical hazard in the workplace, what is the **correct** course of action?

Accepted Answer

Report it to your supervisor immediately

Answer

Attempt to fix it yourself

Answer

Ignore it and continue working

Answer

Wait and report it the next day

Question 18

Which of these is NOT a common fire hazard found in masonry workplaces?

Accepted Answer

Wet sawdust

Answer

Combustible materials

Answer

Welding sparks

Answer

Oil and grease

Question 19

Which type of fire extinguisher is best for putting out electrical fires?

Accepted Answer

Class C

Answer

Class B

Answer

Class D

Answer

Class A

Question 20

If your clothes catch fire, what's the safest thing to do?

Accepted Answer

Stop, drop, and roll

Answer

Throw water on yourself

Answer

Run and try to extinguish the flames

Question 21

How far away should flammable materials be kept from heat sources?

Accepted Answer

At least 18 inches

Answer

As far as possible

Answer

At least 6 feet

Answer

At least 10 feet

Question 22

Which of these is NOT a common fire hazard in a masonry workplace?

Accepted Answer

Lack of ventilation

Answer

Flammable materials

Answer

Electrical malfunctions

Answer

Smoking

Question 23

What's the very first thing you should do if a fire starts at work?

Accepted Answer

Activate the fire alarm

Answer

Attempt to extinguish the fire

Answer

Leave the building immediately

Answer

Call for help

Question 24

Which type of fire extinguisher is most effective against electrical fires?

Accepted Answer

Class C

Answer

Class A

Answer

Class B

Question 25

When using a fire extinguisher, remember to follow the steps in this acronym:

Accepted Answer

PASS

Answer

FAST

Answer

SAVE

Answer

ACES

Question 26

Which of these should NOT be used to put out a grease fire?

Accepted Answer

Water

Answer

Baking soda

Answer

Fire blanket

Answer

Wet towel

Question 27

Which of the following is a benefit of using fire-resistant materials in masonry construction?

Accepted Answer

Improved structural integrity during a fire

Answer

Enhanced aesthetics

Answer

Increased ventilation

Answer

Reduced construction costs